BIT Logo
  • AIM-8 Calibration Box

AIM-8 Calibration Unit

AIM-8 Calibration Unit

The AIM-8-V3 calibration box is used with the AIM-8-V3 unit during the calibration process and contains an internal impedance network (a known calibration standard) that simulates a subject’s bioelectric impedance between the AIM’s electrodes. Though not visible in the picture above, the four bindings post terminals on the box are labeled #1 through #4, corresponding to each of the leads on the impedance electrode cable. The calibration unit is necessary for calibrating the AIM unit and is therefore shipped with both the Complete and Basic AIM-8-V3 System Packages.


MicroTronics LogoMicroTronics HomePage

Back to BIT Products Page

Back to the Complete AIM System Page

Back to to the Basic AIM System Page